Steel coil processing equipment
Steel coil slitting lines cut wide coil into narrow strips; cut to length lines level and cut coil into flat sheets. JINYE builds both in Wuxi, China, for coil from 0.3 mm to 16 mm thick.
Core products
Slitting lines cut wide coil into narrow strips (0.3–12 mm thick); cut to length lines level and cut coil into flat sheets (0.3–16 mm thick), both up to 2000 mm wide.
Why choose JINYE
Every JINYE line is specified from four inputs: the material grade, the strip thickness and width, the output required, and the space available on site.
Designing and manufacturing coil processing equipment since 2000, all of it built in our own Wuxi workshop.
Equipment configurations tailored to material specifications, production targets and customer requirements.
Solutions designed to simplify setup and changeover, streamline material handling and improve production efficiency.
Customer service available 24 hours a day, according to the company's stated service commitment.
Solutions
A processor who sells slit strip runs a slitting line; one who sells flat sheet runs a cut to length line. Shear type — flying, rotary, swing or stop — follows the material and the output.
02 / Cut to length
Cut to Length Processing
For manufacturers that require leveled and accurately cut sheet material.
Explore cut to length
03 / Customized
Customized Coil Processing Lines
For projects requiring equipment configurations based on material specifications, production requirements and factory conditions.
Discuss a custom line
Machine capabilities
Six module types — decoiler, slitter, leveler, shear, recoiler and control — are combined per project; not every module goes on every line.
These are equipment modules that can be selected for a line configuration. Not every module is included in every line.
Discuss your line configurationManufacturing
Line design, machining, assembly and test running are handled in-house in Wuxi, and every line is run as a complete unit before it is packed for shipment.
Line layout, module selection and equipment configuration developed around material, output and site conditions.
Machining, fabrication and mechanical assembly carried out in our workshop before shipment.
Equipment is checked and run before packing, with the line inspected as a complete unit.
Global reach
JINYE has built coil processing lines since 2000, with customers in more than 100 countries across six regions: North America, South America, Europe, the Middle East, Africa and Asia.
Projects
Installation on site, production runs, and assembly and testing before shipment — plus video of a stainless steel slitting line making a full pass.
Resources
Technical notes on line selection, shear types, gauge ranges and project planning, written for buyers comparing equipment.
Industry News
Work hardening, cutting force and surface marking: three reasons stainless needs a different slitting line, and what to change in the specification.
Read More: Slitting Stainless Steel: Why It Is Harder Than Mild Steel
Industry News
Length error comes from the measuring roll, the leveler, shear response and the stacker — where each one costs you millimetres, and what to…
Read More: What Decides Cut to Length Accuracy on a Coil Line?
Industry News
Stop, swing, rotary or flying: how thickness, speed and surface finish decide which shear a cut to length line is built around.
Read More: Flying, Rotary, Swing or Stop Shear: Choosing a CTL ShearNext step
Send the material grade, the coil thickness and width, the output you need and the site conditions. That is enough to work out a line configuration and the working range it has to cover.
Inquiry
Share the basics of your material and production targets. We will review the requirements and respond with the configuration that fits the project.
