Light Gauge Precision Steel Sheet Slitting Line (0.3-3 X 1300)
Light Gauge Precision Steel Sheet Slitting Line is customized as per customers coming steel coil sheet dimensions & weight as well well finished baby coils specification and production. Slitting speed is optional 100m/min, 120m/min, 150m/min, 200m/min plus down time(the time of loading, threading and unloading) within 10minutes. average 15T coil needs 30minutes, each day 8hours can slit 240T.
Continuous light gauge steel coil sheet slitting at high speed in high precision, each unit of slitting line is elaborately designed, machined, assembled and installed to give smooth slitting process. We design and make customized slitting lines of high speed high precision for thin gauge steel sheet slitting for customers around the world (Malaysia, Philippines, Vietnam, Saudi Arabia, UAE, Iraq, Egypt, Algeria, Nigeria, Ghana, Costa Rica, Brazil, Venezuela, Colombia, USA, Kazakastan, Russia, Serabia, Ukraine, etc.)
Composition
Coil preparing saddle, Coil loading Car, Uncoiler, Coil head Opener, Pinch feeder & Pre-leveler, Shear, Pit accumulator 1, Entry guide, Slitter, Scrap winder, Pit Accumulator 2, Tensioner and Pre-separator, post shear and deflector roller, recoiler with overarm separator, coil discharging car, (turnstile)
- Uncoiler: single mandrel cantilever type for coil load 15-20T or double taper heads uncoiler for 20 -30T
- Pinch feeder and Preleveler: pinch feeding steel strip to slitter in Jog and feed strip into pit accumulator in automatic mode.
- Slitter is the heart of the slitting line, install disc knives, spacers, rubber rings or wooden strips to realize slitting, double slitters fast exchange is optional
- Slit tails press roller: installed on roll table over scrap winders, to press slit strips tails not fall into pit loop.
- Scrap winder: vertical type or horizontal type is available, wind up edge scraps.
- Strips separating: three times strips separating( twice before tension, once before recoiling).
- Tensioning station: channels slotted beams clamp wool felt to provide ajustable recoiling tension.
- Deflector encoding roller: deflect strips direction before recoiling and measure line speed to realize synchronization between slitter and recoiler
- Recoiler: seamless mandrel or normal segments mandrel are available, to wind up strips in order under press strips separating.
Parameters
| Mother Coil | Slitting Number | Slitting Speed | Slitting precision | Tools | Power | Capacity |
|
0.3-3mm thick 300-1300mm width 508mm ID 1800mm OD 20T weight |
25strips for 0.3-1mm; 10strips for 2.0-3.0mm; |
0-120m/min adjustable |
20-1300mm strips; ≤+/-0.10mm slit width, coiling hump ≤0.5mm. |
Knives: SKD11, SLD, H13K Spacers: 45# Steel Cushion: rubber, PU rings Nylon separator 16Mn separating discs |
Total 260KW Slitter 90KW Coiler 110KW |
30mins/coil x 15T coil, 8hours 240T |
Layout Drawing
