Automatic Sheet Metal Slitting Line For Medium Gauge
Customized options: customer tells their coming raw coil materials, finished baby strips specification, production capacity(how many tons per year), precision tolerances(slit width, edge burr, edge camber, recoiling hump,etc), as per customer rquirements, we will provide individual complete proposal of whole slitting line, including uncoiling, slitting & recoiling process, delivery time, dispatch and after sale support. We give professional guide and support.
Sheet Metal Slitting Line for Medium Gauge 3 to 8mm thickness, Metal sheet mostly are steel sheet, coil sheet material can be hot rolled (HR, HRC, HRS), cold rolled (CR, CRC, CRS), Galvanized sheet (GI) or Stainless Steel sheet (SUS, STS, SS) below 6mm. Coil sheet width range vary from 1250mm to 2000mm, it depends on customer coil materials source.
Medium gauge Slitting line Characters:
- machines are strong and precise, machine structure will be proportionally stronger than thin gauge slitting line, meanwhile the cutting precision is the same level as thin sheet (+/-0.10mm)
- the slitting speed is variable (50-120m/min) for different thickness slitting, proportional to sheet gauge, the thinner speed higher, the thicker speed lower, we give dual speed transmission ratio to realize the best efficiency.
- Uncoiler usually double mandrel type for heavy load metal coils 25T -30T.
- Scrap winder is heavy load, each side one winder, either drum type or center support type.
- Medium sheet tension station either the same as thin sheets (felt pads) or heavy duty (rollers type), tension is adjustable.
- Recoiler separator either overarm type or portal frame type, parallel pressing strips down over recoil mandrel with coiling diameter increasing, with pressing pressure is adjustable.
- Slitter can be fast change double slitters or fast tools changing turret.
- Dimensions of medium gauge slitting line: 30 -35m length x 10m width
Composition:
Coil preparing saddle, Coil loading Car, Double Heads Uncoiler, Coil head Opener & peeler, Pinch feeder & 5rolls Pre-leveler, Shear, Pit accumulator 1 (transmission table), Side guide, Slitter (double heads optional), Scrap winder, Pit Accumulator 2, Tensioner and Pre-separator,deflector roller, recoiler with press separator, coil discharging car
Parameters
| Material of steel coils | HRC, GI, stainless steel(2-6mm thick), etc. |
| Steel coil thickness | 2-8mm, etc |
| Steel coil width | 1250mm, 1600mm, 1800mm, 2000mm |
| Steel coil inner diameter | 508mm, 610mm, 760mm |
| Coil weight maximum | 30T |
| Slitting speed | 0- 60 -120m/min |
| Number of slitting | 8mm x 6strips; 2mm x 20strips; |
| Total power | 540KW |
| Power source | 380V, 50Hz, 3phases |
| PLC and touch screen | Siemens |
| Delivery time | 150 -180days |
Layout:
